Vape Box mod Kit Electronic cigarette Smoke LS 80W Vapor 2000mah Build-in Battery 3.5ml Vaper Tank Vaporizer Pen Ajust Voltage

Packaging List:

80w Box MOD x 1
3.5ml Tank x 1
Coils x 2
USB Cable x 1
User Manual x1

USING TIPS
1) Wattage can be adjusted by clicking the “+” and “-” buttons. It is recommended to start with low wattage and switch to higher wattage gradually.
2) 5 clicks within 2 seconds to lock the battery when not in use.
3) Coil is made of organic cotton, do NOT use till the coil is saturated in case you get burnt taste.
4) Coil is a consumable part, change every 7-10 days depend on usage.
5) When switch to another flavor liquid, please do clean the tank and change a new coil.
6) Clean your tank with alcohol or water using tissue or cloth.

.Variable 30 / 60/ 80W
.LED Display
.4.0ml Tank
.2200 mAh Battery Inside

HOW TO USE
1) Screw the coil into the base.
2) Drip 2-3 drop liquid into the coil.
3) Fill the tank with E-liquid through the side holes. DO NOT through the center hole.
4) Screw the coil & base into to the tank.
5) Attach the tank to the Box MOD, wait at least 10 minutes to use.
6) 5 clicks within 2 seconds to active the battery.
7) Click the “+” and “-” buttons to set wattage
8) Hold the fire button and inhale the mouthpiece at the same time to vape.
9) Refill the tank timely before the liquid is lower than the intake.

HOW TO CHARGE
First Charge:We recommend charging your device for at least 6 hours on the first charge.  This will condition the battery for future battery life span.
Charging:When the ⚡symbol blinks red 5 times the device needs to be recharged.  Connect the battery to the supplied USB cable and plug it into a computer or wall adapter to charge.  It will take approximately 3 hours to be fully charged.  When fully charged the ⚡ symbol will turn green.  Remove battery from charger once the battery is full.

• WHAT’S IN THE BOX

• Box MOD x 1

• Tank x 1

• Coils x 1

• USB Cable x 1

• User Manual x1